Get Offer



HP2000E

 
MATERIAL AND PERSONNEL HOIST (HP2000E)
MECHANICAL PROPERTIES
  SINGLE CABIN DOUBLE CABIN
Maximum Payload 2000 kg 2 x 2000 kg
Maximum Height 200 m 200 m
Cabin Width 155 cm 2 x 155cm
Cabin Length 300 cm 2 x 300 cm
Cabin Height 217 cm 217 cm
Optimum Shaft Dimensions 321 cm x 300 cm 321 cm x 605 cm
Speed 0 - 30 m/min 0 - 30 m/min
Standard Doors; Guillotine Type (Various Types of Gates (Swing, automatic, etc.) Can Be Used Upon Request)
SCHNEIDER or MITSUBISHI Invertor Provides Soft Start / Stop 
Cabin Can Be Designed According To Special Requests
Special Design Hoist Can Be Made For Unique Needs
Storey Doors Can Be Manufactured Upon Request 
Can Be Stopped Between Storeys
ELECTRICAL PROPERTIES
Motor 1 set 11 kW x 2 ea 2 set 11 kW x 2 ea
Protection Class IP55 IP55
Voltage 380 v – 50 hz  380 v – 50 hz 
Power 40 A 40 A
CONTROL PANEL
Easy error detection by use of PLC LCD Display 
Reduced electric failures due to PLC Control
Optional; Storey levelling or full automatic
High / Low voltage control device
Default Control Type: Manual
Low-voltage Switchboard
Residual Current Device
Phase Sequence Relay 
IP65 Protection Class
SAFETY SYSTEMS 
Fall Protection of Equipment by End Mast 
Security Fence is Standard for This Model 
Emergency Manual Lowering System 
Weight Calculation by Load Cell
Electromagnetic Brake System
Overload Stop System
Mast Protection Panel 
Door Control Switch
Final Mast Switch 
Parachute Brake
Emergency Stop
Audible Warning 
SWITCHES
Up Slow Down Switch Slows Down The Hoist While Moving Upwards
Up Stop Switch Stops the Equipment Moving Upwards 
Up Safety Switch Stops the Equipment When Up Stop Switch Fails 
Down Slow Down Switch Slows Down The Hoist While Moving Downwards
Down Stop Switch Stops the Equipment Moving Downwards 
Down Safety Switch Stops the Equipment When Down Stop Switch Fails 
Hatch Switchi Stops the Equipment If the Maintenance Hatch Is Open 
Door Switches Stops the Equipment If the Door Is Open 
Parachute Brake Switch Alarms When Parachute Brake is Activated
Storey Doors Switches Stops / Avoids The Equipment When The Storey Door Is Open 
Security Fence Door Switch  Stops / Avoids The Equipment When The Security Fence Door Is Open 
MASTS
Welding Method Automatic Welding (to increase durability by low heat introduction)
Compatibility T40 Series Platforms, 2000 series Hoists
Dimensions  1490x500x500 mm
Coating Hot Dip Galvanized
Weight 80 kg
Anchorage Distance 6 m
MONTAGE PLATE
By use of Cable Guide Unwanted Cable Movements are Avoided 
Safe Assembly  Environment by use of Montage Plate
By use of Cable Driver Cable lifetime is Increased 
CERTIFICATES
ISO 2001:9008 Quality Management Certificate 
Compatible with EN 12159, E292 standards
CE and TSE Certificates
ADVANTAGES
High Efficiency
Modular Design
Ease of Storage
Ease of Transport
Makes it easier to Control the Activities 
Easy and Flexible Installation Alternatives
Manufacturer Can Make Alterations in This Specifications
Decreases Cost and Saves Time by Carrying Material to Heigths 
Decreases Cost and Saves Time by Carrying Personel to Heigths 
Closed Cabin Allows Yur Personnel To Have An Increased Safety Standard
Upon Reauest Cabin also Can be Designed as Modular, So It Can Be Taken Out of the Shaft After Construction 
YOUR PERSONNEL DESERVES THIS

 


 

Add your email address